Results 1 to 2 of 2

Thread: 2.4 miss at idle

  1. #1

    Array
    Status
    Offline
    Join Date
    08-25-2012
    Posts
    167
    Location

    Winter Park, FL
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    4G64

    2.4 miss at idle

    My MM has had a crazy miss at idle since I purchased it. I've done all the usual things, plugs, wires, cap and rotor, fuel filter, cleaned valve body and even run a tank of injector cleaner through tank with no difference. Today I installed new injectors, still have same weird idle miss...but now gained a little hesitation right off idle. It took a while to get the computer to figure out the idle after the battery reconnect. The truck has 109,000 miles on it and is a '94. What should I do or look for next. Compression or leak down test. Think it is a valve? Its idling at 800 rpm in video.

    https://youtu.be/dxoFvMYFbBg?si=ySljmFIhzZ5m1FKy

  2. #2


    Array
    Status
    Offline
    Join Date
    05-01-2018
    Posts
    1,481
    Location

    Kailua, HI
    Vehicle

    1986 Dodge Power Ram 50
    Engine

    G54B
    Testing with a vacuum gauge ? I only know that an engine should have good vacuum 'n steady needle reading... I think it can detect vacuum leaks or valve leak..?
    Daily Overhauls Do Get Expensive

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •